PROKUT PLATINUM SUGI HARA SPROCKET NOSE BAR 20 #38 BB

PROKUT PLATINUM SUGIHARA 20 x .325" x .058" x *80 DL, BB Mount, Solid ProfessionalReplaceable Sprocket Nose Guide Bar - Made In Japan

Oregon 208RNBK095Sugihara - Diatop BC3T-8J50-A

Professional premium quality, solid, replaceable sprocket nose guide bar.Husqvarna 582 08 69-80,Oregon 208RNBK095Sugihara - Diatop BC3T-8J50-ANose fastens with three rivets, and is securely held by wide and strong overlappingears.The long sprocket nose takes most of the abuse, and minimizes wear to the barsbody.Super tough steel, heat treated up to 4 times on different parts of the guide bar,provides superior bar-body strength and tough rails with excellent resistance towear and chipping.PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale.Made in Japan.All PROKUT guide bars are reversible for longer life.

Professional premium quality, solid, replaceable sprocket nose guide bar.Manufactured from a single piece of steel, featuring superior durability andstiffness characteristics.High durability sprocket nose.Polished lacquered finish.Nose fastens with three rivets, and is securely held by wide and strong overlappingears.The long sprocket nose takes most of the abuse, and minimizes wear to the barsbody.Super tough steel, heat treated up to 4 times on different parts of the guide bar,provides superior bar-body strength and tough rails with excellent resistance towear and chipping.PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale.Made in Japan.All PROKUT guide bars are reversible for longer life.

20"

20"

50 cm

.325"

PROKUT Platinum Sugihara Series, Solid Professional Replaceable Sprocket Nose Guide Bar

38S / Semi-Chisel or 38F / Full-Chisel

BB

.058"

*80 (*please refer to notes after each fitment application)

11 Tooth sprocket nose

38 cc to 62 cc (2.3 to 3.8 cu. in.)drive link chains from new. This guide bar uses an 80 drive link chain and so theexisting chain will require lengthening (or replacing) to use this PROKUT PlatinumSugihara guide bar on these applications.

*Alpina 460, 510, 540 and 550 models. *Please note these models were fitted with 78drive link chains from new. This guide bar uses an 80 drive link chain and so theexisting chain will require lengthening (or replacing) to use this PROKUT PlatinumSugihara guide bar on these applications.lengthening (or replacing) to use this PROKUT Platinum Sugihara guide bar on theseapplications. Note: Please check your saw carefully prior to ordering, some of theabove saw models were also released fitted with a 3/8" pitch chain. PS410 AfterSerial # 34576 & PS411 After Serial # 33571 use NARROW CUT only.

*Dolmar 109, 109HS, 110, 110i, 111, 111i, 115, 115i, PS-410, PS-411, PS-460,PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105 and PS-5105 H model chainsaws.*Please note these models were fitted with 78 drive link chains from new. Thisguide bar uses an 80 drive link chain and so the existing chain will requirelengthening (or replacing) to use this PROKUT Platinum Sugihara guide bar on theseapplications. Note: Please check your saw carefully prior to ordering, some of theabove saw models were also released fitted with a 3/8" pitch chain. PS410 AfterSerial # 34576 & PS411 After Serial # 33571 use NARROW CUT only.

RANCHER, 455 RANCHER, 460, 460 RANCHER, 466, 543 XP, 543 XPG, 545, 550 XP, 550 XPG,555, 560 XP, 560 XPG, 1200 Electric 1400 Electric, 1500 Electric, 1600 Electric,1800 Electric and H318 model chainsaws. *Please note these models were fitted with78 drive link chains from new. This guide bar uses an 80 drive link chain and sothe existing chain will require lengthening (or replacing) to use this PROKUTPlatinum Sugihara guide bar on these applications.

*Efco 141SP, 147, 152, 156, 165 and MT 5200 model chainsaws. *Please note thesemodels were fitted with 78 drive link chains from new. This guide bar uses an 80drive link chain and so the existing chain will require lengthening (or replacing)to use this PROKUT Platinum Sugihara guide bar on these applications.

*Fairmont Hydraulic 38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513 andLIMBLOPPER model chainsaws. *Please note these models were fitted with 78 drivelink chains from new. This guide bar uses an 80 drive link chain and so theexisting chain will require lengthening (or replacing) to use this PROKUT PlatinumSugihara guide bar on these applications.

uses an 80 drive link chain and so the existing chain will require lengthening (orreplacing) to use this PROKUT Platinum Sugihara guide bar on these applications.

*Husqvarna 33, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 133, 140, 154,234, 238, 240, 242, 242 XP, 246, 254, 254 XP, 257, 261, 262, 262 XP, 336, 339 XP,340, 340 e, 345, 345 e, 346, 346 XP, 346 XP E-TECH, 346 XPG, 350, 350 e, 351, 353,353 E-TECH, 353 G E-TECH, 357 XP, 357 XPG, 359, 359 E-TECH, 360, 362, 362XP, 435,435 e, 440 e, 444, 445, 445 e, 450, 450 50TH ANNIVERSARY, 450 e, 455, 455 eRANCHER, 455 RANCHER, 460, 460 RANCHER, 466, 543 XP, 543 XPG, 545, 550 XP, 550 XPG,555, 560 XP, 560 XPG, 1200 Electric 1400 Electric, 1500 Electric, 1600 Electric,1800 Electric and H318 model chainsaws. *Please note these models were fitted with78 drive link chains from new. This guide bar uses an 80 drive link chain and sothe existing chain will require lengthening (or replacing) to use this PROKUTPlatinum Sugihara guide bar on these applications.

Sugihara guide bar on these applications.

*Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 510, 521,525, 535, 2050, 2050 TURBO, 2051, 2054, 2055, 2149, 2149 TURBO, CS2141, CS2141S,CS2145, CS2145S, CS2149 TURBO, CS2150, CS2152 W, CS2153, CS2156, CS2159, CS2159C,CS2159WH, CS2163, CS2240, CS2245, CS2250, CS2250S and CS2255 model chainsaws.*Please note these models were fitted with 78 drive link chains from new. Thisguide bar uses an 80 drive link chain and so the existing chain will requirelengthening (or replacing) to use this PROKUT Platinum Sugihara guide bar on theseapplications. Note: Please check your saw carefully prior to ordering, some of theabove saw models were also released fitted with a 3/8" pitch chain.

*Makita DCS 430, DCS 431, DCS 460, DCS 510, DCS 520i, DCS 540, DCS5121 and DCS5200i model chainsaws. *Please note these models were fitted with 78 drive linkchains from new. This guide bar uses an 80 drive link chain and so the existingchain will require lengthening (or replacing) to use this PROKUT Platinum Sugiharaguide bar on these applications. Note: Please check your saw carefully prior toordering, some of the above saw models were also released fitted with a 3/8" pitchchain.

*Makita DCS410, DCS411, DCS430 model chainsaws. *Please note these models werefitted with 78 drive link chains from new. This guide bar uses an 80 drive linkchain and so the existing chain will require lengthening (or replacing) to use thisPROKUT Platinum Sugihara guide bar on these applications. Note: DCS410 After Serial# 34576 & DCS411 After Serial # 33661 use NARROW CUT only.

*McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MAC 2818 AV, MS1846 AV, MS 1849 AV, MS 1850, MS 2046 AV, MS 2046 AVCC, MS 2049, MS 2049 AV, MS2049 AVCC, MS2050, PM 1845 AV, Pro Mac: 40, 46. PM4300, PM4700, PM5000, PM5200,SILVER EAGLE: 2818, 3020 and TIMBER BEAR 20 (later models) model chainsaws. *Pleasenote these models were fitted with 78 drive link chains from new. This guide baruses an 80 drive link chain and so the existing chain will require lengthening (orreplacing) to use this PROKUT Platinum Sugihara guide bar on these applications.

*MTD 152 model chainsaws. *Please note these models were fitted with 78 drive linkchains from new. This guide bar uses an 80 drive link chain and so the existingchain will require lengthening (or replacing) to use this PROKUT Platinum Sugiharaguide bar on these applications.Sugihara guide bar on these applications.

with a 3/8" pitch chain.

*Oleo-Mac 925F, 938, 940C, 941, 941 CX, 942, 945, 946, 947, 947F, 950, 951, 952,956 and 962 model chainsaws. *Please note these models were fitted with 78 drivelink chains from new. This guide bar uses an 80 drive link chain and so theexisting chain will require lengthening (or replacing) to use this PROKUT PlatinumSugihara guide bar on these applications.

on these applications.

*Opem K1 and K2 model chainsaws. *Please note these models were fitted with 78drive link chains from new. This guide bar uses an 80 drive link chain and so theexisting chain will require lengthening (or replacing) to use this PROKUT PlatinumSugihara guide bar on these applications.

*Parklander GL4500M-18 model chainsaws. *Please note these models were fitted with78 drive link chains from new. This guide bar uses an 80 drive link chain and sothe existing chain will require lengthening (or replacing) to use this PROKUTPlatinum Sugihara guide bar on these applications.

*Partner 360, 400, P-360, P-400, P-450, P-500 and P-5000 model chainsaws. *Pleasenote these models were fitted with 78 drive link chains from new. This guide baruses an 80 drive link chain and so the existing chain will require lengthening (orreplacing) to use this PROKUT Platinum Sugihara guide bar on these applications.

*Pioneer 1074, P-21, P-26 and P-28 model chainsaws. *Please note these models werefitted with 78 drive link chains from new. This guide bar uses an 80 drive linkchain and so the existing chain will require lengthening (or replacing) to use thisPROKUT Platinum Sugihara guide bar on these applications.

*Poulan / Poulan Pro 325 and PP5118 model chainsaws. *Please note these models werefitted with 78 drive link chains from new. This guide bar uses an 80 drive linkchain and so the existing chain will require lengthening (or replacing) to use thisPROKUT Platinum Sugihara guide bar on these applications.

*Redmax G390, G450AVS, G455AVS, G5000, G5000AVS and G5300 model chainsaws. *Pleasenote these models were fitted with 78 drive link chains from new. This guide baruses an 80 drive link chain and so the existing chain will require lengthening (orreplacing) to use this PROKUT Platinum Sugihara guide bar on these applications.sprocket nose guide bar option use our part number GAFBB2038PL (which uses a 78drive link chain. Use this guide bar with our semi-chisel chain loop part numberGAF38S078DL or our full-chisel chain loop part number GAF38F078DL). For a bar andchain combo option containing a semi-professional laminated multi-rivet sprocketnose guide bar and 78 drive link semi-chisel chain use our part number GAF105714.Replaces our part number OMK208RNBK095

*Ryobi RFS4518 and RFS5418 model chainsaws. *Please note these models were fittedwith 78 drive link chains from new. This guide bar uses an 80 drive link chain andso the existing chain will require lengthening (or replacing) to use this PROKUTPlatinum Sugihara guide bar on these applications.

*Sina SCS4500I model chainsaws. *Please note these models were fitted with 78 drivelink chains from new. This guide bar uses an 80 drive link chain and so theexisting chain will require lengthening (or replacing) to use this PROKUT PlatinumSugihara guide bar on these applications.

*Solo 613, 614, 631, 632, 634, 638, 639, 641, 644, 645, 647, 650, 651, 651 SP, 652,654, 656 and 656 SP model chainsaws. *Please note these models were fitted with 79drive link chains from new. This guide bar uses an 80 drive link chain and so theexisting chain will require lengthening (or replacing) to use this PROKUT PlatinumSugihara guide bar on these applications.

*Stanley Hydraulic CS05 and CS06 model chainsaws. *Please note these models werefitted with 78 drive link chains from new. This guide bar uses an 80 drive linkchain and so the existing chain will require lengthening (or replacing) to use thisPROKUT Platinum Sugihara guide bar on these applications. Note: Please check yoursaw carefully prior to ordering, some of these saw models were also released fittedwith a 3/8" pitch chain.

*Tanaka ECV 5601 model chainsaws. *Please note these models were fitted with 78drive link chains from new. This guide bar uses an 80 drive link chain and so theexisting chain will require lengthening (or replacing) to use this PROKUT PlatinumSugihara guide bar on these applications.

*Zenoah G390, G450AVS, G455, G455AVS, G500, G5000, G5000AVS and G5300 modelchainsaws. *Please note these models were fitted with 78 drive link chains fromnew. This guide bar uses an 80 drive link chain and so the existing chain willrequire lengthening (or replacing) to use this PROKUT Platinum Sugihara guide baron these applications.

1

For a standard PROKUT solid professional replaceable sprocket nose guide bar optionuse our part number GAFBB2038RS (which uses a 78 drive link chain. Use this guidebar with our semi-chisel chain loop part number GAF38S078DL or our full-chiselchain loop part number GAF38F078DL). For a semi-professional laminated multi-rivetsprocket nose guide bar option use our part number GAFBB2038PL (which uses a 78drive link chain. Use this guide bar with our semi-chisel chain loop part numberGAF38S078DL or our full-chisel chain loop part number GAF38F078DL). For a bar andchain combo option containing a semi-professional laminated multi-rivet sprocketnose guide bar and 78 drive link semi-chisel chain use our part number GAF105714.Replaces our part number OMK208RNBK095

PROKUT PLATINUM SUGIHARA, GA Forestry Accessories

Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocketnose guide bar,