PROKUT LOOP OF CHAINSAW CHAIN 38S .325 PITCH .058 66DL
PROKUT .325" Pitch x .058" Gauge x 66 Drive Link Loop Of Semi-Chisel Chainsaw ChainPacked In A Retail Blister Pack
OREGON 21BPX066G
High performance, durable, reliable.
38S
.325"
38S / Semi-Chisel
.058"
Round
Standard
66
Selected chainsaws from 38 cc to 62 cc when fitted with a 16" (40 cm) long x .325"pitch x .058" gauge x 66 drive link guide bar including but not limited toselected -
Alpina 460, 510, 540 and 550 chainsaw models.
Dolmar 109, 109HS, 110, 110i, 111, 111i, 115, 115i, PS-410, PS-411, PS-460, PS-510,PS-540, PS-5000 D, PS-5100 S, PS-5105 and PS-5105 H chainsaw models. Note: Pleasecheck your saw carefully prior to ordering, some of the above saw models were alsoreleased fitted with a 3/8" pitch chain. PS410 After Serial # 34576 & PS411 AfterSerial # 33571 use NARROW CUT only.
Husqvarna 33, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 133, 140, 154,234, 238, 240, 242, 242 XP, 246, 254, 254 XP, 257, 261, 262, 262 XP, 336, 339 XP,340, 340 e, 345, 345 e, 346, 346 XP, 346 XP E-TECH, 346 XPG, 350, 350 e, 351, 353,353 E-TECH, 353 G E-TECH, 357 XP, 357 XPG, 359, 359 E-TECH, 360, 362, 362XP, 435,435 e, 440 e, 444, 445, 445 e, 450, 450 50TH ANNIVERSARY, 450 e, 455, 455 eRANCHER, 455 RANCHER, 460, 460 RANCHER, 466, 543 XP, 543 XPG, 545, 550 XP, 550 XPG,555, 560 XP, 560 XPG, 1200 Electric and 1500 Electric chainsaw models. Note: Pleasecheck your saw carefully prior to ordering, some of the above saw models were alsoreleased fitted with a 3/8" pitch chain.
Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 510, 521, 525,535, 2014, 2016, 2036, 2036 Turbo, 2040, 2040 Turbo, 2041, 2050, 2050 TURBO, 2051,2054, 2055, 2141, 2149, 2149 TURBO, CS2141, CS2141S, CS2145, CS2145S, CS2149 TURBO,CS2150, CS2152 W, CS2153, CS2156, CS2159, CS2159C, CS2159WH, CS2163, CS2240,CS2245, CS2250, CS2250S and CS2255 chainsaw models. Note: Please check your sawcarefully prior to ordering, some of the above saw models were also released fittedwith a 3/8" pitch chain.
Makita DCS410, DCS411 Note: DCS410 After Serial # 34576 & DCS411 After Serial #33661 use NARROW CUT only. DCS 430, DCS 431, DCS 460, DCS 510, DCS 520i, DCS 540,DCS5121 and DCS 5200i chainsaw models. Note: Please check your saw carefully priorto ordering, some of the above saw models were also released fitted with a 3/8"pitch chain.
McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MAC 2818 AV, MS1846 AV, MS 1849 AV, MS 1850, MS 2046 AV, MS 2046 AVCC, MS 2049, MS 2049 AV, MS2049 AVCC, MS2050, PM 1845 AV, Pro Mac: 40, 46. PM4300, PM4700, PM5000, PM5200,SILVER EAGLE: 2818, 3020 and TIMBER BEAR 20 (later models) chainsaw models.
Pioneer 1074, P-21, P-26 and P-28 chainsaw models.
Poulan / Poulan Pro 325 chainsaw models.
Redmax G390, G450AVS, G455AVS, G5000, G5000AVS and G5300 chainsaw models.
Ryobi RFS4518 and RFS5418 chainsaw models.
Sina SCS4500I chainsaw models.
Stanley Hydraulic CS05 and CS06 chainsaw models. Note: Please check your sawcarefully prior to ordering, some of these saw models were also released fittedwith a 3/8" pitch chain.
Every PROKUT chain features:• Every component is precisely manufactured from high quality German steel.• Engineered for precision, balance and low vibration.• Manufactured to exacting standards of strength, durability and quality.• Chromed cutters for a sharper edge and a longer life.• Every single rivet used in PROKUT chain is individually induction-hardened fora precise, consistent hardness providing unrivalled stretch and wear resistance.• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides ahigh-performance chain that is ready to use with the absolute minimum of stretchstraight out of the box!• Every single PROKUT cutting tooth is stamped with the pitch and gauge of thechain to make each chain easily identifiable at a quick glance.Individual Chain Features:• Semi-chisel cutters• Vibration absorbing cutters for less equipment wear and operator fatigue• Blued components resist corrosion and provide superior strength• Oil cavities and indentations in drive teeth for better lubrication delivery
1
Recommended for chainsaws from 38 cc to 62 cc when fitted with a 16" (40 cm) long x.325" pitch x .058" gauge x 66 drive link guide bar.
Bought this in case my ‘fix’ on the original throttle body didn’t work. The original throttle control uses a spacer in the movement mechanism to keep the setting in position. Unfortunately this spacer broke after normal use and the throttle control had no resistance to keep in its setting. Fixed by adding a new ‘spacer’ and hammer-peened the original fixing mechanism. Fingers crossed but now have a replacement if needed!